Visualizing 3D Design with Ease

By Alyssa
Share on LinkedInTweet about this on TwitterShare on FacebookShare on Google+

Designers have been working in 3D software for years, generally reviewing their work on a 2D computer screen.  Even as larger monitors were produced, there were limits to how well a product could be viewed on a flat surface; not all product elements could be seen enough to ensure issues were caught early – critical since that’s when it is a lot less expensive to make changes.

Some large, well-funded companies developed immersive CAVEs (Cave Automatic Virtual Environment): virtual reality environments consisting of a cube-shaped room in which the walls, floors and ceilings are projection screens.  Donning a VR headset, users can interact aided by devices such as wands, joysticks or data gloves.

But not everyone can afford to build a CAVE, and even those that can are limited by the expense of the headsets and by the requirement that users be present at the facility in which the CAVE is located.

In 2016, a new solution for 3D design review emerged: low-cost head mounted devices, or HMDs. This development is opening up an entirely new age of design.  Now, many more designers and engineers – regardless of where in the world they are – can immerse themselves in a design and experience it in a way that makes any issues much more evident.  This saves time and money because changes can be made before the physical product is built.

Check out the latest issue of Compass for an article entitled “Product Design Enters a New Reality.”  You’ll discover examples of how organizations like Embraer and NASA are leveraging this immersive virtuality (iV) technology, and how they expect it to improve their designs and the processes behind them, as different teams can collaborate more easily and see – and resolve – issues in less time.

 

Images © Embraer and © HTC

Staying on Top of Change

By Catherine
Share on LinkedInTweet about this on TwitterShare on FacebookShare on Google+

By Catherine Bolgar

 

Network on cityscape background

Just as humans develop from a single cell and end up with some 13 trillion cells by the time they’re born nine months later, so too do products start with a concept or definition—essentially a single data point.

Whether that definition is expressed as a design on paper or digitally, it represents data, explains Callum Kidd, lecturer and leading configuration management researcher at the University of Manchester, U.K. The data then evolves, matures, is iterated and eventually becomes a defined configuration, which is a collection of more data. That process turns out a product whose use, maintenance, quality and lifecycle may be monitored, generating still more data.

We have created a digital world and [have] become more and more adept at creating data. But we haven’t created awareness of managing data, from creation to disposal,” Mr. Kidd says.

Just as in the single-cell example above, “We create life in data from day one, not by adding in something along the way. True, nature has taken millions of years to perfect this, but we need to learn lessons faster if we are to manage products and systems through life effectively.”

86661501_thumbnailKeeping track of this process can be mind-boggling, due to the many changes along the way—and especially when it involves many partners, suppliers and sub-tier suppliers. This is where configuration management enters the scene.

Configuration management is how we define a configuration, which is essentially data at some level of maturity,” he says. “By evolving that data, and managing changes to it reflecting the evolution of its definition, we create physical structures, or systems. These, however, are just data represented in a physical form. Essentially, we manage [product] design and [product] definition data through life. The validated physical representation is merely proof that the data was valid.

Configuration management is like just-in-time [manufacturing] for data,” he adds. “It gets the right data in the right format to the right people at the right time.”

Configuration management is closely linked with product lifecycle management, or PLM, which follows a product from concept to disposal. But “that’s a one-dimensional, linear view of the world,” Mr. Kidd says. “In reality, we share information backward and well as forward.”

Taking the aerospace industry as an example, “it’s highly possible that due to complex work-share arrangements, we could be managing changes in the design, manufacture and support phases of the life cycle concurrently,” Mr. Kidd says. “This adds considerable complexity in managing the status of data at any point in time. We need to know exactly what we have if we are to manage changes to that data effectively. That is one of our greatest challenges in a modern business environment.”

A survey of more than 500 companies last year, Aberdeen Group, a technology, analytics and research firm based in Waltham, Massachusetts, found that for many companies configuration management remains a manual, handwritten process. Aberdeen separated the companies into “leaders” and “followers,” and found that only 54% of leaders and a mere 37% of followers had automated or digital change management.

Yet, keeping track of frequent engineering changes during the development process is the top challenge, cited by 38% of companies. Among industrial equipment manufacturers, 46% named frequent engineering changes as their biggest challenge.

Changes are amplified by the increased complexity of products themselves. In another report, published in 2015, Aberdeen found a 13.4% increase in the number of mechanical components, a 19.6% climb in the number of electrical components and a 34.4% rise in lines of software code over the previous two years.

“Especially for industrial equipment manufacturers, products are getting more complex and customizable,” says Nick Castellina, vice president and research group director at Aberdeen Group. “Configuration management helps manage the flow of all that data and the lifecycle and needs of the shop floor. It centralizes all the visibility into the needs of each new product being built and how that interacts with any materials you’re trying to get at any stage.”

Visibility is important, because “sometimes it’s the minutest of things that can cause the biggest failures of all,” Mr. Kidd says. Automated configuration management not only ensures that all changes are recorded, along with the reasoning behind them, but also serves as a record in the future of every decision that was made in respect of a configuration’s life.

Businesspeople working togetherChange boards, which gather the relevant stakeholders, are the primary mechanism for approving change in configuration management. These boards are dealing with greater volume of change and complexity of the impact. That’s why “every piece of information in that room is retained and digitized. Notes that somebody makes but doesn’t communicate may be relevant,” Mr. Kidd says. Even emails are archived.

“We live in a litigious society,” he says. “Configuration management can prove you did the right thing, even if in the future a decision is called into question. You can show you made decisions based on the best possible information, and in the knowledge that you understood the status of the configuration at that point—in short, proving that you took due diligence in the process.”

 

Catherine Bolgar is a former managing editor of The Wall Street Journal Europe, now working as a freelance writer and editor with WSJ. Custom Studios in EMEA. For more from Catherine Bolgar, along with other industry experts, join the Future Realities discussion on LinkedIn.

Photos courtesy of iStock